Product Information

Product Information: ChargePoint® Home Flex

This pilot uses the ChargePoint Home Flex EV smart charger. Detailed information about this charger can be found below.

ev featured image

Description Model Number

Station and Cable Model

16A-50A, NEMA 14-50 plug, 7010.4 mm (23') Charging Cable




dimensions evcharger



Input CordNEMA 14-50
AC Power Output RatingMaximum 12 kW (240V AC * 50A). Output amperage adjustable via mobile app to 16A, 24A, 32A, 40A, 48A, 50A.
AC Power Input Rating208/240V AC 60Hz single phase @ 16A, 24A, 32A, 40A, 48A, 50A
Required Service Panel BreakerDedicated Dual Pole rated for 125% of maximum load (ex: 50A breaker for 40A output)
Service Panel GFCIExternal GFCI may conflict with internal GFCI (CCID). For hardwired installations, use a non-GFCI circuit breaker.
Power Wiring3 Wire – L1, L2 plus Earth (no neutral)
Charging Cable Length7010.4 mm (23')
Connector TypeSAE J1772™
Power Measurement Accuracy

+/- 2.0% from 2% to full scale

Power report/ Store Interval15 minute aligned to hour


Safety and Connectivity Features

Ground Fault Detection20 mA CCID with auto retry
Open Safety Ground DetectionContinuously monitors presence of safety (green wire) ground connection
Plug-Out DetectionPower terminated per SAE J1772 specifications
Local Area Network2.4/5 GHz Wi-Fi (802.11 a/b/g/n)
Device StorageLocal data storage with capacity of up to 90 days of charging session data (100 sessions) in case of interrupted network connection
Software UpdatesFirmware updated over-the-air (OTA)


Safety and Operational Ratings

Enclosure RatingsType 3R per UL 50E
Safety and Compliance

UL and cUL listed product per UL2594, UL2231-1, UL2231-2. NEC Article 625 compliant

For Canada CSA C22.2, No. 280, 281.1, 281.2, CEC
EMI ComplianceFCC Part 15 Class B
Storage Temperature-40°C to 60°C (-40°F to 140°F) ambient
Operating Temperature-30°C to 50°C (-22°F to 122°F) ambient
Operating HumidityUp to 95% at 50°C (122°F) non-condensing
Non-Operating HumidityUp to 95% at 50°C (122°F) non-condensing
ENERGY STAR® CertificationYes



Fault Indicator per ULYes
Status LEDYes



Install SoftwareMobile App (iOS & Android)
Outdoor Installation

Hardwired installation or weatherproof NEMA receptacle

Note: Required by code to install an outdoor rated GFCI breaker upstream for outdoor plug-in installation


For additional product, installation and charging information, and FAQs visit the ChargePoint Home Flex resources page.